InstroTek® PaveScan™

PAVESCAN®
Powered by GSSI Technology
continuous rolling ASPHALT density measurement system

with Pavescan® The Future of Zero Coring is Within Reach

The InstroTek PaveScan® Powered by GSSI Technology is a non-nuclear system that provides accurate real-time and continuous
density measurements, ensuring the quality of pavements and asphalt joints. This system is ideal for helping contractors build
uniform asphalt pavements and can potentially reduce the number of cores required on a pavement project.

 

 

PaveScan automatically measures density and can display percent compaction using pavement dielectric values. This innovative
technology is used to construct high quality pavements and superior asphalt joints. The PaveScan System is lightweight
and folds easily for transportation to and from the job site in a work vehicle. Advanced cable management makes setup
easy and can be completed in less than 5 minutes. Once the unit is set up, simply push the system over the pavement or
along the joint. A laser guide helps the operators ensure the measurements are gathered directly over the asphalt joint.

 

 

 

The on-board computer can display data in real time from 1, 2 or 3 sensors. Asphalt joints can be measured with only one
sensor and three sensors are recommended for coverage of the entire pavement width. The operator can now ensure that the
entire pavement is constructed at the highest quality possible by continuously monitoring the density on the system display.
All data can be stored for post testing analysis and reporting with project and station identification numbers.

3 sensors offer a wider range of measurements for entire pavement and joint coverage

The PaveScan is the first continuous asphalt density system that will help contractors
efficiently improve asphalt pavement uniformity, reduce variations
in density and increase the quality of asphalt pavements.

 

F EATURES

* Meets AASHTO PP 98-19
* Accommodates up to 3 sensors for full pavement
and joint coverage
*The most accurate and precise method of
measuring asphalt joint density
*Built specifically for the extremes of the asphalt
paving environment
*Green laser to aid in location accuracy

*Optional GPS receiver and built-in pole adapter
*Simple User Interface on Panasonic G1 tablet with
minimal on-site configuration
*Rugged modular assembly for easy deployment
and transport
*Foldable deployment arms with high visibility for
work site safety
*Easily charge and exchange batteries

S P E C I F I C ATI O N S
Tablet
Easy View Display 10.1” WUXGA 1920 x 1200 with
LED backlight
Processor Intel® i5-7300U
Available Ports Ethernet, USB, HDMI
Environmental Rating IP65
Drop Spec MIL-STD-810G
Measurement
Density Precision ± 0.13%
Minimum/Maximum dielectric 2 to 16
Sensor Frequency 2 GHz
Storage Capacity 256 GB
mechanical
Dimensions: One sensor cart system 157 x 63 x 111 cm (62 x 25 x 44 in)
Three sensor cart system 157 x 185 x 111 cm (62 x 73 x 44 in)
Weight 81.4 – 94.6 lbs (36.9 – 42.9 Kg)
Environmental Rating IP65
Storage Temperature -55°C to 85°C (-67°F to 185°F)